Randolph Manufacturing Company, Australia is a company with experience manufacturing high quality Gear Drives in Australia.
Lubricate the drive shaft before using according to shaft manufacturer's specifications.
When installing flexible shafts, be sure that joints are assembled with lugs in the same plane as shown (above). If lugs are not as shown, unequal acceleration occurs in the joints and vibration and knocking develop. Allow for slip movement in each direction.
Excessive noise and vibration in a new gear drive is almost always an indication of a poor installation as all drives are tested at the factory. Failure to correct the installation can result in damage to the pump and the gear drive. Our warranty will not apply unless the drive is properly installed. Proper installation includes alignment of power unit, right angle drive and pump. It is also necessary to provide an adequate foundation for the pump and engine and a positive method of preventing the power unit from shifting to assure that alignment will be maintained.
Beginning in the suburbs of Sydney,
Randolph Manufacturing Australia has been built up to become a highly
reputable name in right-angle gear drive production; experiencing
international success as well as nation-wide.
Randolph Right Angled Gear Drives
When installing flexible shafts, be sure that joints are assembled with lugs in the same plane as shown (above). If lugs are not as shown, unequal acceleration occurs in the joints and vibration and knocking develop. Allow for slip movement in each direction.
Excessive noise and vibration in a new gear drive is almost always an indication of a poor installation as all drives are tested at the factory. Failure to correct the installation can result in damage to the pump and the gear drive. Our warranty will not apply unless the drive is properly installed. Proper installation includes alignment of power unit, right angle drive and pump. It is also necessary to provide an adequate foundation for the pump and engine and a positive method of preventing the power unit from shifting to assure that alignment will be maintained.
